The most advanced grid-tie PV inverter in the world. Converting sun light into 

electricity energy for home / industrial applications, and powering up our world 

with free solar energy is now no longer just a dream.

Features:

It is the most advanced solar inverter for grid connected PV-plant. This inverter is 

designed base on the following principles:High converting efficiency / boosting 

system efficiency via MPPT / Low cost / easy installation and maintenance / 

user friendly / and long-life usage.

With 3 different input voltage ranges allowing customer to have flexible choice for 

different applications.

96.5% high converting efficiency and up to 99% high MPPT efficiency are both above 

average market standard.

This inverter is designed to be user friendly and with easy installation to reduce 

installation costs. 

User can easily monitor the system status from the remote control display LCD panel.

IP-65 enclosure protects against severe outdoor installation environment.

USB & RS-232 communication ports are available for remote monitoring & control. 

With optional RS485 or SNMP card for future expansion.

• Maximum Input Power : 1875W
• Nominal DC voltage:  360V ~ 400V
• Maximum Input Voltage: 500VDC
• MPPT voltage range :  150V to 500V +/-5%
• System start-up voltage : 100 +/-5%
• Working voltage range: 100 +/-5% ~ 500-5%+0%V
• Initial feeding voltage: 150V +/-5%
• Full rating working range: 250V to 500V
• Max. input current: 7.5ADC
• Shutdown voltage: 80V typical
• DC voltage ripple: < 10%
• DC insulation resistance: > 8M ohm
• DC Switch: On/Off 20A
• DC Connector: Tyco-contract (1-pair)
• Attached DC Connector: Tyco-contract (1-pair) cable type

• Nominal output power: 1500W
• Maximum output power (The time is limited to 10 minutes @ 50°C ambient):1650W
• Operational Voltage range: 198V minimum; 256V maximum
• Operational Normal voltage:230 Vac
• Operational frequency range: 50/60Hz, auto selection; 47.5
• Nominal output current: 6.6A
• O/P current distortion: THD<5%, each harmonics <3%
• Power Factor: > 0.99%
• DC current injection: <0.5% of rated inverter output current

• Internal power consumption: < 7W
• Standby power (at night):< 0.1W
• Minimum conversion efficiency (DC/AC):>90% ; Under input voltage>210V, load >20%
• Maximum Conversion Efficiency (DC/AC): >94%
• European Efficiency: >93%
• GFCI threshold: See ground fault current detection
• Ground current detection range: 0~500mA
• Ground current detection frequency:0~700Hz
• DC input impedance requirement: >2M Omega
• Protection degree: IP 65 or IP43
• Operation temperature: -25 to 50°C
• Humidity:0 to 95%, non-condensing
• Heat Dissipation: Convection
• Acoustic noise level: <40dB, A-weighted, frequency up to 20kHz
• Altitude:Up to 3000m without power derating, 5°C derated for each additional 500m

• Physical: W*D*H (mm): 352*300*133
  Shipping: W*D*H (mm):465*465*285